FEEDER SYSTEMS
On The Mark, Inc. machines are engineered for high speed, easy set up and economical operation. Saving customers time and money equals increased profit.

High Speed

Easy Setup

Economical

On The Mark, Inc. Feeder Systems

High Speed, Easy Set up & Economical Operation

The feed systems that OTM produces are some of the fastest and most economical in the ammunition industry. OTM make’s 7 different models of feeders to ensure that we can meet your needs for feed rate and volume.

OTM feeders are different from any other feed systems in the industry, because we offer interchangeable caliber conversions.  This allows the user to use the original base unit then purchase additional feeder wheels and discharge blocks for different calibers.

 

 

Our feeders can run anywhere from .380 ACP – 50 cal in the same feeder with a 5 – 10 min caliber changeover. All our components for our feeders are CNC machined which means holes always line up and parts fit as they should, which leads to ease of use and long machine life. All OTM feeders come with a 6 month limited warranty which starts from shipment date and covers the motor, hardware, electronics and malfunctions.

Play Video

16” Feeder Models

OTM-160A / OTM-160B

The OTM 16” feeder models are constructed for smaller machines with low volume and feed rate requirements. Generally made for cases 380 ACP to 308 Win under 100 PPM, and bullets from 380 ACP to 338 Lapua under 120 PPM.

Standard orientation of parts for our feeders is base or primer first. Standard orientation of parts offers faster lead times on whole feed systems and caliber change overs.

  •  Stainless steel wall.
  • Standard billet aluminum machined components.
  • Motor protection system.
  • Servo motor with planetary gear drive.
  • PLC controller.
  • Proximity ring sensor.
  • IP 65 rated motor and PLC connections.
  • Stainless steel hardware.
  • Teflon tubing.
  • Caliber change over kit. (handles/shims)
  •  Black Hard Coat Anodize.
  • Stands with custom colors.
  • Custom drive shaft/motor mount plate for OEM’s.
  • Custom part orientation.
  • Custom part discharge.

20” Feeder Models

OTM-200A / OTM-200B

The OTM 20” feeder models are constructed for smaller to medium sized machines with low to medium volume and feed rate requirements. Generally made for 380 ACP to 223 cases under 200 PPM, 308 to 338 Lapua cases under 100 PPM. Bullet feed rates for 380 ACP to 223 range from 150 to 200 PPM. Larger bullets from 308 to 50 Cal range from 100 to 150 PPM.

Standard orientation of parts for our feeders is base or primer first. Standard orientation of parts offers faster lead times on whole feed systems and caliber change overs.

  •  Stainless steel wall.
  • Standard billet aluminum machined components.
  • Motor protection system.
  • Servo motor with planetary gear drive.
  • PLC controller.
  • Proximity ring sensor.
  • IP 65 rated motor and PLC connections.
  • Stainless steel hardware.
  • Teflon tubing.
  • Caliber change over kit. (handles/shims)
  •  Black Hard Coat Anodize.
  • Stands with custom colors.
  • Custom drive shaft/motor mount plate for OEM’s.
  • Custom part orientation.
  • Custom part discharge.

24” Feeder Models

OTM-240A

The OTM 24” feeder models are constructed for medium to large sized machines with medium to high volume and feed rate requirements. Generally made for cases 380 ACP to 308 Win under 200 PPM, 7mm to 338 Lapua under 150 PPM. Most pistol case calibers are well over 275 PPM, this size feeder is also used for live ammo ranging from 120 – 200 PPM.

Standard orientation of parts for our feeders is base or primer first. Standard orientation of parts offers faster lead times on whole feed systems and caliber change overs.

  •  Stainless steel wall.
  • Standard billet aluminum machined components.
  • Motor protection system.
  • Servo motor with planetary gear drive.
  • PLC controller.
  • Proximity ring sensor.
  • IP 65 rated motor and PLC connections.
  • Stainless steel hardware.
  • Teflon tubing.
  • Caliber change over kit. (handles/shims)
  •  Black Hard Coat Anodize.
  • Stands with custom colors.
  • Noise enclosures.
  • Custom drive shaft/motor mount plate for OEM’s.
  • Custom part orientation.
  • Part diverter.
  • Horizontal discharge down zig zag magazine.
  • Aluminum slide for discharge on to conveyor belt.
Play Video

30” Feeder Models

OTM-300A

The OTM 30” feeders are constructed for large machines with high volume and feed rate requirements. Generally made for cases 380 ACP to 308 Win under 250 PPM, 7mm to 338 Lapua under 200 PPM. Most pistol case calibers are well over 300 PPM, this feeder is also used for live ammo ranging from 180 – 230 PPM. Standard orientation of parts for our feeders is base or primer first.

Standard orientation of parts offers faster lead times on whole feed systems and caliber change overs. Our larger feed systems have other capabilities including automotive and battery industries.

  •  Stainless steel wall.
  • Standard billet aluminum machined components.
  • Motor protection system.
  • Servo motor with planetary gear drive.
  • PLC controller.
  • Proximity ring sensor.
  • IP 65 rated motor and PLC connections.
  • Stainless steel hardware.
  • Teflon tubing.
  • Caliber change over kit. (handles/shims)
  •  Black Hard Coat Anodize.
  • Stands with custom colors.
  • Noise enclosures.
  • Custom drive shaft/motor mount plate for OEM’s.
  • Custom part orientation.
  • Part diverter.
  • Horizontal discharge down zig zag magazine.
  • Aluminum slide for discharge on to conveyor belt.
Play Video

40” Feeder Models

OTM-400A

The OTM 40” feeder models are constructed for large machines with high volume and feed rate requirements. Generally made for cases 380 ACP to 308 Win under 300 PPM, 7mm to 338 Lapua under 250 PPM. Most pistol case calibers are well over 300 PPM, this size feed system is also used for live ammo ranging from 200 – 300 PPM. Standard orientation of parts for our feeders is base or primer first.

Standard orientation of parts offers faster lead times on whole feed systems and caliber change overs. Our larger feed systems have other capabilities including automotive and battery industries.

  •  Stainless steel wall.
  • Standard billet aluminum machined components.
  • Motor protection system.
  • Servo motor with planetary gear drive.
  • PLC controller.
  • Proximity ring sensor.
  • IP 65 rated motor and PLC connections.
  • Stainless steel hardware.
  • Teflon tubing.
  • Caliber change over kit. (handles/shims)
  •  Black Hard Coat Anodize.
  • Stands with custom colors.
  • Noise enclosures.
  • Custom drive shaft/motor mount plate for OEM’s.
  • Custom part orientation.
  • Part diverter.
  • Horizontal discharge down zig zag magazine.
  • Aluminum slide for discharge on to conveyor belt.
Play Video